Hydraulic 7 Inch Wood Chipper With 360 Degrees Adjustable Discharge Chute

7 Inches Wood Shredder With Hydraulic System For 4 Cutting Knives

Hydraulic In-feed System

Branches are pulled into the BX72R via the large diameter in-feed roller. The roller is hydraulically driven via the chippers self contained hydraulic system. The roller is adjustable in direction and speed making it easy to feed branches of all shapes and sizes. The hydraulic pump is direct drive from the lower shaft, meaning there is no need to worry about wearing or loose drive belts. The roller down pressure may be adjusted via the two large springs ensuring it grabs branches and easily pulls them in, eliminating the need for manual feeding.

Flywheel

The dynamically balanced 29 Inches (74cm) diameter, 1 Inches (25mm) thick solid steel flywheel runs on a 2 Inches (50mm) diameter shaft and is supported by 3 industrial and greaseable flanged bearings.

Chipper Blades

The BX72R chipper utilizes four high quality hardened steel reversible chipper blades. They can be flipped to take advantage of having two cutting edges on one blade.

Discharge Chute

The discharge chute was designed to rotate 360 degrees by simply rotating it with the discharge latch handles to the desired angle. This makes it possible to direct the wood chips in any direction regardless of the location of the chipper. It quite easy to direct the wood chips into the back of a truck or trailer if desired. Located at the end of the discharge chute is a rotating deflector, which allows further control of the location of the wood chips. Simply point it straight for maximum distance or angled down to deflect the chips directly down to the ground or into a trailer.

Warranty

The BX72R is covered by a full 1 year warranty against any manufacturing defects.

7 wood chipper

bx72r wood chipper

Hydraulic 7 Inch Wood Chipper With 360 Degrees Adjustable Discharge Chute Images